Schönox KH FIX
Ready Mixed, Solvent-Free Acrylic Primer especially suitable on existing gypsum substrates to bind residual dust, reduce absorbency, and improve adhesion. Interior and Exterior use.

Technical Data
-
Coverage
-
Approx. 580 – 960 sq.ft. per 2.5 gallon unit depending on the porosity of the substrate
-
Approx. 2,500 – 2,700 sq.ft. when used as a primer for the SCHÖNOX ROLL AND GO™ adhesive (using the SCHÖNOX KH FIX ROLLER)
-
Approx. 540 sq.ft. per 2 units of 0.25 gallons when used as part of the SCHÖNOX ROLL AND GO™ SET
-
-
Drying Time
- Approx 10 minutes on cement based substrates
- Approx 30 – 60 minutes on water resistant, calcium sulfate substrates and Schönox AP
- Approx 60 minutes on water resistant, gypsum plaster
- Approx 10 minutes on gypsum board
- Approx 60 minutes on old, water resistant adhesive residues
- Approx 60 minutes on particleboard, OSB board
-
Emicode
- EC 1 PLUS: very low emission PLUS
-
LEED
- EQc2 Low-Emitting Materials – 1 to 3 points
-
Shelf Life
- 12 months
-
VOC Content
- 0g/l (calculated), SCAQMD 1113
-
Working Temperature
- Not below 59°F floor temperature
-
Packaging
- 60 / pallet
-
Packsize
- 2.5 gallons in plastic container